- Arduino Uno Style Board
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
- ATMEGA16U2 USB-to-UART bridge
UNO Board (Arduino Compatible)
$8.95
In stock
In stock
Description
This is an Arduino Uno compatible board. The Arduino Uno is a microcontroller development board, based on the Atmel ATMEGA328P, that contains everything needed to run including power regulation, a crystal oscillator, and a USB-to-serial programmer, a USB connection, an ICSP header, and a reset button. The USB-to-serial programming bridge is based on the ATMEGA16U2. The Uno supplies 14 GPIOs (6 PWMs), 6 analog inputs, UART, TWI, and SPI while running at 16 Mhz. The Uno can be powered from an AC-to-DC wall adapter (6 – 20V) or it can be powered directly from USB.
Technical Specs
| Microcontroller | ATmega328P |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limit) | 6-20V |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| PWM Digital I/O Pins | 6 |
| Analog Input Pins | 6 |
| DC Current per I/O Pin | 20 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 32 KB (ATmega328P) of which 0.5 KB used by bootloader |
| SRAM | 2 KB (ATmega328P) |
| EEPROM | 1 KB (ATmega328P) |
| Clock Speed | 16 MHz |
| LED_BUILTIN | 13 |
| Length | 68.6 mm |
| Width | 53.4 mm |
| Weight | 25 g |
Resources
Additional information
| Weight | 1 oz |
|---|---|
| Dimensions | 4.5 x 3 x 0.5 in |
