Nokia 5110 LCD Display Shield with Joystick 84×48

Description

This Arduino shield uses the LCD screen that was used in the Nokia 5110 and 3310 cell phones and adds a joystick to allow menu navigation. The display is monochromatic with 84×48 pixels of resolution and a white backlight and it communicates through an SPI protocol and is supported by the Adafruit GFX library. The joystick has four directions plus a click action. All five of the joystick actions are input to through Arduino through one analog pin; with a different analog value for each action.

Pinout

D2 – Serial Clock (SCLK)
D3 – Data In (DIN)
D4 – Data/Command Select (D/C)
D5 – LCD Chip Select (CS)
D6 – LCD Reset (RST)

A0 – Joystick Output

Resources

• Nokia 5110 Driver Library on GitHub
• GFX Library on GitHub