- Arduino Nano Style Board
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
- ATMEGA16U2 USB-to-UART bridge
Nano V3.0 Board (Arduino Compatible)
$8.95
In stock
In stock
Description
This is an Arduino Nano V3.0 compatible board. The Arduino Nano is a small form-factor, breadboard compatible, microcontroller development board based on the Atmel ATMEGA328P. It contains everything needed to run including power regulation, a crystal oscillator, and a USB-to-serial programmer, a USB connection, an ICSP header, and a reset button. The USB-to-serial programming bridge is based on the ATMEGA16U2. The Nano supplies 16 GPIOs (6 PWMs), 6 analog inputs, UART, TWI, and SPI while running at 16 Mhz. The Nano is powered directly from USB.
Technical Specs
| Microcontroller | ATmega328 |
| Architecture | AVR |
| Operating Voltage | 5 V |
| Flash Memory | 32 KB of which 2 KB used by bootloader |
| SRAM | 2 KB |
| Clock Speed | 16 MHz |
| Analog I/O Pins | 8 |
| EEPROM | 1 KB |
| DC Current per I/O Pins | 40 mA (I/O Pins) |
| Input Voltage | 7-12 V |
| Digital I/O Pins | 22 |
| PWM Output | 6 |
| Power Consumption | 19 mA |
| PCB Size | 18 x 45 mm |
| Weight | 7 g |
Resources
Additional information
| Weight | 0.3 oz |
|---|---|
| Dimensions | 2.7 × 2 × 0.8 in |
You must be logged in to post a review.
Reviews
There are no reviews yet.