Skip to content
-
- Unique 1-Wire® Interface Requires Only One Pin for Communication
- Can Run Many Sensors On One Bus
- Runs on 3.0-5.5V
- Range: -55°C to +125°C (-67°F to +257°F) ±0.5°C
- 9 to 12-bit Resolution (User Selectable)
-
- MPU 6050 3-Axis Gyroscope, 3-Axis Accelerometer
- HMC5883L 3-axis Magnetometer
- BMP180 Barometer Pressure Sensor
- Operating Voltage: 3v - 5V
- Dimensions: 0.83 x 0.67 x 0.12 in (2.1 x 1.7 x 0.3 cm)
-
- PCA9685 Module
- 16 Channels
- Drive Servos or PWM LEDs
- Soldering Required
-
-
- 3-axis accelerometer, 3-axis gyro, 3-axis magnetometer
- MPU6500 + 3-axis Magnetometer
- Communicates via TWI/I2C
- Runs on 5V
-
- Active Buzzer Module
- Does Not Need Oscillating Signal
- Operating Voltage: 3.5-5.0V
- 30mA Current Draw @ 5V
-
- Use up to 1GB SD card
- 6KHz to 32KHz, 36KHz sampling rate of AD4 audio
- 6KHz to 16KHz sampling rate of WAV audio
- Amplified Speaker Output
- Operating voltage: DC 2.6 to 3.6V
-
- Pressure range: 300-1100hPa
- Altitude Range: 1640 BMSL - 29520 ft AMSL
- Resolution: 0.03 hPa (0.25 m at Sea Level)
- Operating Voltage: 1.8 - 3.6V
-
- Logic Level Converter
- 4 Channel
- Bi-directional
- 1.8 - 5.5V Compatible
-
- Input Voltage: 2 – 24 V
- Output Voltage: 2 – 28 V
- Switching frequency: 1.2MHz
- Maximum current output: 2A
- Dimensions: 0.91 x 0.64″ (23 x 16.3 mm)
-
- Input voltage: 3 - 34V
- Output voltage: 4 - 35V
- Input Current: 3A Max
- Output current: 2.5A Max
-
- Boost Regulator
- Boosts from 3V to 35V
- 4A Output
-
- Input Voltage: 5 - 32V
- Output Voltage: 1.25 - 35V
- Input Current: 3A Max
- Iin = Iout * Vout / (0.85 * Vin)
-
- Step-Down Regulator
- Input: 4.75 - 23 V
- Output: 1.0 - 17 V
- Current Rating: 1.8 A
-
- Step-Down Regulator
- Input: 4.5 - 40 V
- Output: 1.3 - 40 V
- Current Rating: 3 A
-
- Input Range: 4 - 40v
- Output Voltage: 1.3 - 37 V
- Output Current: 2 A
- Dimensions : 65mm x 35mm
-
- 12-bit resolution
- I2C Interface (Standard, Fast, and High-Speed supported)
- 2.7V to 5.5V supply
- Internal EEPROM to store settings
-
- Laser Emitter
- Runs on 3-5V
- Logic Level Control
- Attracts cats
-
- Liquid Crystal Display (LCD) Driver
- TWI/I2C Communication
- Runs on 3-5V
-
- Load Cell Amplifier
- Gain: 32, 64, or 128
- Supply Voltage: 5V
- 3.3V or 5V Logic Compatible