Skip to content
-
- ESP8266 Development Board
- Onboard WiFi
- Arduino IDE Compatible
- Arduino Form-factor
- 3.3V Logic
-
- Arduino Uno Style Board
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
- CH340G USB-to-UART bridge
-
- Arduino Uno Style Board
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
- ATMEGA16U2 USB-to-UART bridge
-
- 2o Sensor Connections (5V, Sig, GND)
- 6 Analog Sensor Connections
- 1 Communication Connector (I2C or UART)
- 5V Compatible
- Arduino Shield
-
Sale!
- Arduino Uno Compatible
- Built-in microSD Socket
- Low-Power Consumption
- Perfect for Datalogging
- Pairs well with energyShield 2 Pro
-
- Quad H-Bridge
- Control 4 DC Motors or 2 Stepper Motors
- 4.5 - 25V, Up to 600mA Per Channel
- 2 Additional 5V Servo Connectors
-
- Arduino Pro Mini Style Board
- 5V / 16Mhz
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
-
- Arduino Pro Mini Style Board
- 3.3V / 8Mhz
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
-
- Arduino Pro Micro Board
- 5V / 16Mhz
- 18 GPIOs (5 PWM), 9 Analog Channels, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA32U4
-
- Monochromatic LCD Display Shield
- 84x48 Pixels
- SPI Communication
- 4 Direction Joystick + Click Analog Output
-
- Arduino Nano Style Board
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
- CH340G USB-to-UART bridge
-
- Arduino Nano Style Board
- 16 GPIO (6 PWM), 6 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA328P
- ATMEGA16U2 USB-to-UART bridge
-
- Screw Terminals
- Compatible with Arduino Nano
-
- Protoshield
- 170 Point Breadboard
- Reset Button
- Pin 13 LED
- Button for Input
-
- Arduino MEGA2560 style board
- 54 GPIO (15 PWM), 16 Analog Inputs, 4 UART Modules
- Fully Arduino compatible
- Based on ATMEGA2560
- ATMEGA16U2 USB-to-UART bridge
-
- Arduino Leonardo Style Board
- 20 GPIO (7 PWM), 12 Analog Inputs, UART, TWI, SPI
- Fully Arduino compatible
- Based on ATMEGA32U4
-
- 80 Mhz Processor
- Wi-Fi with Built-in TCP/IP Stack
- 9 GPIO, 1 Analog Input, UART, TWI/I2C, SPI
- 3.3V Logic
- VCC: 3-6V
-
Sale!
- 1800mAh Lithium-Ion Battery
- Runs for MONTHS Using Sleep Mode!
- Charge from Solar Panel, USB, or DC Adapter
- Software Controlled MPPT Solar Charging!
- Battery Fuel Gauge and Real-Time Clock
- Easy-to-use Arduino Library
-
Sale!
- 1800mAh Lithium-Ion Battery
- Runs for 24+ Hrs!*
- Charges from USB in ~6 Hrs
- 5V and 3.3V Outputs
-
Sale!
- Arduino Uno R3 Compatible
- Built-In 1800mAh Lithium-Ion Battery!
- Runs 24+ Hrs on Single Charge!*
- Charges from USB in ~6 Hrs
- 5.0V and 3.3V Outputs
